ORIGINAL EchoStar® EQUIPMENT ~  NOT AN AFTERMARKET PRODUCT!

• Designed to be used with the DISH 500® Antenna.  Use to capture signals from both Dish Network satellites (119º and 110º).
• The third port is used to collect and combine signals from a separate satellite dish antenna aimed at either the 61.5º OR 148º satellite (Round 18-inch dish equipped with a DISH-PRO LNBF is required).
• Supports connection of up to two satellite receivers in any combination:
  • Single-cable connection to DISH Pro Plus (dual-tuner) receivers, when each is used with a DP Plus Separator. DP Plus Separators are sold separately.
  • Single-cable connection to two single-tuner DISH Pro receivers.
  • Single-cable connection to Legacy receivers, without a DISH Pro Adapter.
• Includes an LNBF input port for reception from a third orbital location.
  • Allows connected receiver(s) to receive signal from three orbital locations (not available when two legacy receivers are connected).
  • Eliminates need for an additional switch for this three orbital location installation.
• All necessary switches are built-in and weather-proof.
• DISH Pro Plus (dual-tuner) receivers supported include these models: 322, 522, 625, 721, 921, 942 and equivalent JVC and RCA models.
• Legacy receivers supported include these models: 2700, 2800, 3700, 3900, 4700, 4900 and 6000. *Important: Third input port is disabled if two Legacy receivers are connected. You must have one Dish Pro Receiver connected to realize full potential of this product.