Features:
With Included Null Modem Cable and Diseqc 4x1 Switch
The Fortec Star MERCURY II satellite receiver provides digital free-to-air satellite reception.
MERCURY II is a powerful satellite receiver ideal for satellite enthusiast. The receiver has an easy-to-use Menu, yet is feature-rich. MERCURY II comes with a comprehensive Power Scan for blind searching satellites. Users can back up their channel list before upgrading the software, and then restore the channel list, all from within the receiver’s own menu. The front panel has 8 buttons allowing complete control of the receiver’s functions without the use of the remote. The back panel has all the connection options you would need, with RCA composite jacks, component jacks (Y,Pb,Pr), and an S-video connection.
|
Ideal for Satellite Enthusiasts
Features
- Channel Back-up and Channel recovery function
- 8-button Menu Control on the front panel
- Component video (Y,Pb,Pr) and S-Video connections
- 3 RCA connections (1 Video, 2 Audio L/R)
- POWER Scan (blind search) with complete parameter control
- One-button quick start Power Scan on the remote
- One-button jump to Channel Edit function
- Dolby Digital 5.1 audio pass-through (optical)
- 100 programmable satellites and 6,000 programmable channels
- Timer function for Sleep / Wake Up / VCR Record and Channel Reminder
- Fully MPEG 2 / DVB compliant, MCPC/SCPC, C/KU reception
- 1 LNB input with IF loop through for 2nd receiver
- Manual PID scan function
- DiSEqC 1.2 and USALSsupported
- Picture-In-Graphics function
- Multi-Picture (4,9, 13 or 16 pictures) function
- ZOOM In/Out
- Electronic Program Guide
- Multi language menu
- 8 favorite channel group selection and parental lock
- Close Caption Supported
- Data transfer: receiver-to-receiver or PC-to-receiver
| | | |
|
|
|
Input Frequency |
950 MHz to 2150 MHz |
|
Input Signal Level |
-30 to -65dBm |
|
Input Impedance |
75 ohm nominal |
|
Input Connector |
F-type, IEC 169-24, Female |
|
FEC Decoder |
Convolution Code Rate l/2, 2/3, 3/4,
5/6 and 7/8 with Constraint Length K=7 |
|
Demodulation |
QPSK |
|
Symbol rate |
1-45 Ms/s SCPC/MCPC |
|
IF Frequency |
Roman">Zero IF |
|
LNB Power & Polarization |
V13 / H18, 500mA MAX. overload protection |
|
DiSEqC Control |
DiSEqC. 1.0, 1.1 / DiSEqC 1.2 Compatible |
|
Positioner |
USALS compatible |
Memory |
|
Processor |
NEC 61114 |
|
Flash Memory |
2 Mbytes |
|
SDRAM |
16 Mbytes |
|
Satellite Capacity |
100 |
|
Channel Capacity |
6,000 |
Audio / Video Decoding |
|
Video Decoder |
MPEG-2 MP@ML (ISO/IEC 13818-2) |
|
Input Rate |
60Mbit/s Max |
|
Video Resolution |
720 x 480(NTSC) |
|
Aspect Ratio |
4:3, 16:9 (Letter Box) |
|
Audio Decoder |
MPEG Layer I &II |
|
Audio Mode |
Mono L/R, Dual Channel, Joint Stereo, Stereo |
|
Audio Sampling Frequency |
32, 44.1, 48 KHz |
Audio / Video Output |
|
Video |
RCA composite, component (Y,Pb,Pr), S-Video |
|
Audio R/L |
RCA/Cinch Volume & Mute Control< |
|
S/PDIF |
Digital Audio Output
DOLBY DIGITAL 5.1 Pass-through |
|
Serial Data Interface |
|
Connector Type |
9 Pin D-Sub (male) |
|
Signal |
RS-232C, Max. 115200Bps |
Power Supply |
|
Supply Voltage |
100VAC ~ 120VAC 60Hz(SMPS) |
|
Power Consumption |
Max. 30W |
General |
|
Weight |
Approx. 2.52 Kg |
|
Dimensions |
300(W) x 210(D) x 60(H)mm |
|